Quality Objective: It is
the policy of Dayton T. Brown, Inc. (DTB)
to provide the highest quality test services and test
products, at a profit if we can...at a loss if we must, that
reflects each and every employee's contributions towards
achieving a level of excellence that meets or exceeds the
expectations of our customers.
Quality Experience: With over 50 years experience as a
quality control test center, DTB is one of the nation's
largest and most thoroughly equipped independently-owned
laboratories of its kind; providing a complete range of
dynamic, environmental, atmospheric, electromagnetic, fatigue
engineering and testing services all in one convenient location.
In addition, a fully documented calibration laboratory
which meets the requirements of MIL-STD-45662A, 1S010012-1,
ANSI/NCSL Z540-1-1994 and ISO/IEC 17025, augments DTB's
services. The Quality Assurance Department is staffed by a RAB
certified Quality Management Systems Lead Auditor, several
inspectors and a Quality Engineer. They are supported by
additional quality personnel in the other divisions, which are
located on the same site. In addition DTB also provides sheet
metal manufacturing, technical publications, and high tech test
support equipment.
Quality Program: The Engineering and Test Division of
Dayton T. Brown has...
•
Achieved laboratory accreditation from the American Association
for Laboratory Accreditation (A2LA) in accordance with the
requirements of ISO/IEC 17025 requirements. We also have AEMCLAP
accreditation.
•
Achieved approved status by DCMA to MIL-Q-9858A.
•
Maintains a fully documented Quality Assurance Management
System, which meets the applicable requirements of MIL-Q-9858A,
EN45001, ISO 9001, AS9000 and ISO/lEC 17025.
•
Achieved accreditation by (NVLAP) National Voluntary Laboratory
Accreditation Program for MIL-STD-462.
•
Have
completed the (AEMCLAP) Automotive EMC Laboratory Accreditation
Program assessment process, and achieved accreditation under
this program. This program is directed by Ford, General Motors,
and Daimler Chrysler and is managed by A2LA.
By the accomplishment of these objectives,
the Engineering and Test Division of Dayton T. Brown, Inc.
strives to ensure the following:
•
Total
customer satisfaction by meeting or exceeding customer
requirements and expectations.
•
Process control and continuous improvement of our operations.
•
Continued total employee involvement to ensure the highest
quality of engineering and testing services.
•
Most
importantly, test results that you can count on.
The Engineering and Test Division of Dayton
T. Brown, Inc. meets a variety of military and commercial
specifications and is certified to the following:
Method/Item
Specification
Qualification Level
•
Liquid Penetrant
Inspection
•
MIL-STD-6866
Level II & Level
III
•
Magnetic Particle
Inspection
•
ASTM E1444
Level II & Level
III
•
TEMPEST Testing
•
NSTISSAM TEMPEST
•
Medium Weight
Hammer Shock
•
MIL-S-901
Department of the Navy
•
Light Weight
Hammer Shock
•
MIL-S-901
Department of the Navy
•
FCC Facility
•
ANSI Standard
•
Welding
•
MIL-STD-248
•
PC Boards
•
IPC-A-610
Building
Total
Space 300,000 Square Feet
Engineering and Test Division 150, 000 Square Feet
Personnel -
Engineering and Test Division 106 Employees
5 Inspectors
2 Quality Assurance
QA Approvals Quality auditors
from our major customers and US Government frequently verify
that our quality system conforms to their requirements. All
audits are welcome.
For the full
scope of accreditation, and to see what else we can offer you,
visit the Dayton T. Brown, Inc. web page at
www.DTB.com
If
you would like any additional information, please do not
hesitate to call:
Charles Gortakowski, Quality Director
(631)-244-6315
(cgortakowski@dtbtest.com)
